HIGHLIGHTS
| Price | $65USD |
| HeatStick Type | HEETS, Marlboro for IQOS |
| What’s Included in the Kit | Device Manual Quality Control Card Other Documents USB Cable Cleaning Brush Cleaning Sticks |
| Number of Consecutive Uses | 18-20 |
| Type of Blade | Flat blade |
| Cycle Length | 5.5 minutes or 16 puffs |
| Charging Time | 1 hour, 15 minutes |
| Features | Temperature adjustment, automatic cleaning |
| Warranty | 6-month manufacturer warranty, 15-day money-back guarantee |
| Colors | Black, Silver, Green, Gold, Red |
WOULD WE RECOMMEND?
Lambda T3 is a solid device that offers 18-20 consecutive uses, temperature adjustment, and automatic cleaning. Definitely a good device, but the price is a bit too high.
FEATURES: Temperature adjustment, automatic-cleaning.
QUALITY: Seems good, but would the tempered glass side panels hold up for a long period of time? Hmmm
DESIGN: Nice, we’re not sure what the point of the tempered glass side panels is though.
[embedyt] https://www.youtube.com/watch?v=TwaNVgGZDHU[/embedyt]
UNBOXING
In your Lambda T3 kit you will find; the device, the manual, a Quality Control card, other documents, a USB cable, a cleaning brush, and cleaning sticks.
Once you’ve unboxed your device you can check the charge. To do so just click on the control button once. The color of the light will correspond to battery charge. White means 100-30% charge remaining, yellow means 30-1% remaining, red means 0% remaining. Charging time for T3 is very convenient at only 1 hour and 15 minutes.
HOW TO USE
Now that you’re Lambda T3 device is charged, you can begin using it. Here’s how;
- Set temperature
- press and hold the temperature control button
- the color of the temperature control button light indicates the set temperature
- white = low
- yellow = high
- Insert the HeatStick
- Press and hold control button to turn on
- Device will vibrate and light will begin flashing to show heating has started
- heating takes approximately 25 seconds
- Device will vibrate and light will turn solid when heating is done and device is ready to use
- cycle lasts 5.5 minutes or 16 puffs
- When cycle is over, device will vibrate and light turns off
- Remove HeatStick by pushing cap up and pulling HeatStick out
For good device health, make sure you clean you Lambda T3 device often. You can clean with the automatic-cleaning feature or manually. To use the automatic cleaning feature, click the control button 5 times. Automatic-cleaning will take approximately 30 seconds. To manually clean, wait until the device is cool then remove the cap from the body of the device and use either the cleaning brush or the cleaning sticks to wipe away any grime and build-up that is left in the HeatSticks heating chamber.
HEATSTICKS OVERVIEW
The Lambda brand does not produce their own HeatSticks. Instead, their devices are designed to work with other branded HeatSticks, such as HEETS and Marlboro for IQOS HeatSticks.
MANUAL
Lambda T3 Other Documents PDF Download
WARRANTY
Lambda T3 comes with a 6-month warranty beginning on the date of purchase. The warranty does not cover damage caused by misuse. Lambda also offers a 15-day (beginning on the date of purchase) money-back guarantee. To enact the warranty or the money-back guarantee you must return everything that was originally shipped to you in the kit. See ‘Manufacturer Overview’ below for contact information.
SPECS
| Kit Price | $65USD |
| Diameters | 102 x 28 x 15 mm |
| Weight | 71g |
| Weight with Packaging | 181g |
| Material | PEEK, PPSU, and PC |
| Battery Type | Li-ion (1500mAh) |
| Power Input | USB Cable |
| Maximum Blade Temperature | 219°C/ 426°F |
| Charging Time | 1 hour, 15 minutes |
| Time it Takes for Device to Heat | 25 seconds |
| Length of Cycle | 5.5 minutes or 17 puffs |
| Number of Consecutive Uses | 18-20 |
| Features | Temperature adjustment, automatic-cleaning |
| HeatSticks | HEETS, Marlboro for IQOS |
| Can Kit Accessories be Purchased Separately | No |
| Colors Available | Black, Silver, Green, Gold, Red |
| Comparable To | HiTaste Q1 |
MANUFACTURER OVERVIEW
|
Manufacturer
|
Shenzhen Original Technology Co. Ltd.
|
|
Location of Manufacturer
|
Shenzhen, China
|
|
Years in Business
|
2011
|
|
Product Launch Year
|
2019
|
|
Manufacturer Website
|
|
|
Impression of Manufacturer’s Website
|
Easy to navigate and informative
|
|
Full Product Line that the Manufacturer Offers
|
PURCHASE INFORMATION & CUSTOMER SUPPORT
|
Where to Buy
|
Wholesaler: Here
Customer: Here
|
|
Regions Lambda ships to
|
All countries where Heat-not-Burn is allowed (click here to check your country)
|
|
Regions the Manufacturer is Wholesaling to
|
Japan, South Korea, Italy, Ukraine, Russia, Romania, Bulgaria,the Philippines, Malaysia, Singapore, and Indonesia
|
|
Regions the Manufacturer Would Like to Wholesale to
|
United Kingdom, expand influence in Japan, South Korea, Russia, and Italy
|
|
Manufacturer Contact Information for Customer Service
|
Email: sales@szoriginal.com
|
|
Manufacturer Contact Information for Wholesalers
|
|
|
Manual Languages
|
EN, JA, KO, ZHO
|
|
Shipping and Delivery Time
|
Varies based on region
|
Don’t forget to comment and rate this device below!
