Updated Lambda CC

HIGLIGHTS

[embedyt] https://www.youtube.com/watch?v=Pc42aCINl9s[/embedyt]

WOULD WE RECOMMEND?

FEATURES: OLED screen, temperature adjustment, length of use adjustment, usage record, automatic cleaning, and easy-to-replace blade/rod.

QUALITY: We really like that Lambda has improved the design of their CC device after hearing customer’s feedback. This updated version of Lambda fixes the “no atomizer” issue that was somewhat common with the original version of Lambda.

DESIGN: Nice, looks the same as the old Lambda CC. The internal design is alot better now that there is easy to replace heating blade/rod. We love does offer both flat blades or rods. Now you can choose what heating element best suits your preference.

UNBOXING

Heat180

In the Lambda CC kit you will find; the device, the manual, a Quality Control card, a USB cable, and a cleaning brush.

When you first get your device, check its charge by pressing the control button once and looking for the battery icon on the screen. If your device needs some charging, just connect it to a power source via a USB cable. When charging is done the screen will turn off. Charging takes approximately 3 hours.

HOW TO USE

Heat180

Now that the device is charged you can customize its settings and begin using it. Here’s how;

1. Set temperature:
   • click + or – buttons to set desired temperature
   • you can choose anywhere between 200C°/392F° and 300C°/572F°
   • click any button to continue
2. Set length of use:
   • click control button 5 times
   • length of cycle numbers will flash
   • click + or – buttons to set desired length of use
   • you can choose anything between 3 minutes and 6 minutes
   • click any button to continue
3. Insert the HeatStick
4. Turn on:
   • press and hold control button
5. Device will vibrate and temperature numbers change when heating begins
   • heating time varies based on set temperature
6. Device will vibrate and desired temperature will show on screen when ready to use
7. Warning vibration before the cycle ends
8. Device will vibrate and return to home screen when cycle ends
9. Remove HeatStick by pushing cap up and pulling HeatStick out

Heat180

Lambda CC also comes with a usage record and automatic cleaning. To use these features, follow the steps below;

1. Comes with a usage record and automatic-cleaning
   • To clear usage record: click control button 5 times, length of cycle numbers will flash, click control button 5 more times, usage record numbers will flash, click any button to clear
   • To use automatic clean: click control button 8 times, cleaning takes 25 seconds

You’ll also want to clean manually clean your device. To do so, just wait until cool, remove the cap, place the cleaning brush into the heating chamber and use it to sweep away any grime.

change blade

As we mentioned above, the updated version of Lambda CC has a new feature where you can change your blade. This was introduced as quite a few users of the original Lambda CC device encountered the ‘no atomizer’ problem. This was a technical malfunction that happened when the blade got damaged in any way, even a minor scratch. With the updated Lambda CC, if you ever see ‘no atomizer’ on screen, you can quickly change out the damaged blade with a new one. To do so, just pull out the heating element and replace it with a new one. New heating elements can be purchased on their website.

HEATSTICKS OVERVIEW

The Lambda brand does not product their own HeatSticks. Instead, their devices are designed to work with other branded HeatSticks, such as HEETS and Marlboro for IQOS HeatSticks.

MANUAL

Lambda CC PDF Download

SPECS

MANUFACTURER OVERVIEW

PURCHASE INFORMATION & CUSTOMER SUPPORT

Don’t forget to comment and rate this device below!