HIGHLIGHTS
Price | $58USD |
HeatStick Type | HEETS, Marlboro for IQOS |
What’s Included in the Kit | Pocket Charger Holder Manual USB Cable Cleaning Brush Cleaning Sticks |
Number of Consecutive Uses | Pocket Charger: 1
Holder: 20-25 |
Type of Blade | Flat blade |
Cycle Length | 5 minutes, 40 seconds or 16 puffs |
Charging Time | Pocket charger: 1 hour, 35 minutes
Holder: 3 minutes, 30 seconds |
Features | None |
Warranty | 6-month warranty, 15-day money-back guarantee |
Colors | Black, White, Red |
WOULD WE RECOMMEND?
If you want an inexpensive alternative to IQOS 2.4/2.4 Plus, Lambda A1 is a great option! This device is only $58USD, compared to IQOS, which averages around $100USD. Lambda A1 also offers consecutive uses, which IQOS does not. Great!
FEATURES: None
QUALITY: Good, blade can be a bit fragile.
DESIGN: The pocket charger is a little bit bigger in size than IQOS 2.4/2.4 Plus, the holder is roughly the same.
[embedyt] https://www.youtube.com/watch?v=jKIfDiI-NUQ[/embedyt]
UNBOXING
In your Lambda A1 kit you will find; the pocket charger, the holder, the manual, a USB cable, a cleaning brush, and cleaning sticks.
Once you’ve unboxed your A1 kit, check the charge of your pocket charger by clicking the power button once. The 4 LED indicator lights on the front of the pocket charger will show you the amount of charge remaining. 4 lights means that there is 75%+ charge remaining, 3 lights means 75%-50% remaining, 2 lights means 50%-25%, and 1 light means that there is 25% or less charge remaining. If there is anything less than 4 lights lit when you press the power button, we recommend charging. To charge, put the holder in the pocket charger, and connect the pocket charger to a power source via the USB cable. Charging takes approximately 1 hour, 35 minutes.
HOW TO USE
Once charged, your Lambda A1 device is ready to use. Here’s how;
- Take holder out of pocket charger
- Insert the HeatStick into holder
- Press and hold holder control button
- Holder will vibrate and light will begin flashing to show heating has started
- heating takes approximately 25 seconds
- Holder will vibrate and light will turn solid when device is ready to use
- cycle lasts 5 minutes, 40 seconds or 16 puffs
- Holder will give warning vibration 25 seconds before turning off and light will flash
- Light will turn off when cycle ends
- Remove HeatStick by pushing holder cap up and pulling HeatStick out
- Put holder back in pocket charger to charge
For optimal use, make sure to clean your device regularly. To do so, remove the holder from the pocket charger, remove the holder cap, inert the cleaning brush or cleaning sticks into the holder heating chamber and use them to wipe away grime.
HEATSTICKS OVERVIEW
The Lambda brand does not produce their own HeatSticks. Instead, their devices are designed to work with other branded HeatSticks, such as HEETS and Marlboro for IQOS HeatSticks.
MANUAL
WARRANTY
Lambda A1 comes with a 6-month warranty beginning on the date of purchase. The warranty does not cover damage caused by misuse. Lambda also offers a 15-day (beginning on the date of purchase) money-back guarantee. To enact the warranty or the money-back guarantee you must return everything that was originally shipped to you in the kit. See ‘Manufacturer Overview’ below for contact information.
SPECS
Kit Price | $58USD |
Diameters | Pocket Charger: 104 x 51 x 23mm
Holder: 91mm length x 51mm circumference |
Weight | 117g |
Weight with Packaging | 293g |
Material | Unknown |
Battery Type | Pocket Charger: Li-ion (2600 mAh)
Holder: Li-ion (130 mAh) |
Power Input | USB Cable |
Maximum Blade Temperature | 187°C/ 369°F |
Charging Time | Pocket charger: 1 hour, 35 minutes
Holder: 3 minutes, 30 seconds |
Time it Takes for Device to Heat | Depends on set temperature |
Length of Cycle | 5 minutes, 40 seconds or 16 puffs |
Number of Consecutive Uses | Pocket Charger: 1
Holder: 20-25 |
Features | None |
HeatSticks | HEETS, Marlboro for IQOS |
Can Kit Accessories be Purchased Separately | No |
Colors Available | Black, White, Red |
Comparable To | IQOS 2.4/2.4 Plus |
MANUFACTURER OVERVIEW
Manufacturer
|
Shenzhen Original Technology Co. Ltd.
|
Location of Manufacturer
|
Shenzhen, China
|
Years in Business
|
2011
|
Product Launch Year
|
Unknown
|
Manufacturer Website
|
|
Impression of Manufacturer’s Website
|
Easy to navigate and informative
|
Full Product Line that the Manufacturer Offers
|
PURCHASE INFORMATION & CUSTOMER SUPPORT
Where to Buy
|
Wholesaler: Here
Customer: Here
|
Regions Lambda ships to
|
All countries where Heat-not-Burn is allowed (click here to check your country)
|
Regions the Manufacturer is Wholesaling to
|
Japan, South Korea, Italy, Ukraine, Russia, Romania, Bulgaria,the Philippines, Malaysia, Singapore, and Indonesia
|
Regions the Manufacturer Would Like to Wholesale to
|
United Kingdom, expand influence in Japan, South Korea, Russia, and Italy
|
Manufacturer Contact Information for Customer Service
|
Email: sales@szoriginal.com
|
Manufacturer Contact Information for Wholesalers
|
|
Manual Languages
|
EN, JA, KO, ZHO
|
Shipping and Delivery Time
|
Varies based on region
|
Don’t forget to comment and rate this device below!