Greensound TOBA

HIGHLIGHTS

WOULD WE RECOMMEND?

Fabulous in every way possible! Greensound’s TOBA is a great device to have for both new and experienced Heat-not-Burn users. Toba is simple to use but very good quality. It provides a nice experience. It has a unique design that we haven’t seen with many other devices, in that it comes with a removable blade insert. This helps alot with cleaning the blade and will also improve the lifespan of your device, since you can replace the blade when it gets worn out. The best thing about TOBA? It’s only $20USD.

FEATURES: Locking feature.

QUALITY: Excellent! As soon as you pick this device up you will feel how heavy it is. It’s stainless steel, not plastic. We really appreciate that the manufacturer invested in this! The blade itself is a bit more fragile since it’s flat – like an IQOS blade – but if you’re gentle with it, it will be okay.

DESIGN: We really liked the design of this device, especially the blade. You can remove it from the heating chamber to get right in there and clean it. This will probably help with the longevity of the blade. But you can also remove it fully if it gets old or broken and replace it with the extra blade insert included in your kit. Think about how much more use you’ll get out of your HnB device when you can easily replace the blade! Excellent!

BUY NOW

[embedyt] https://www.youtube.com/watch?v=WtvOQLDKFOY[/embedyt]

UNBOXING

In your Greensound TOBA kit you will find; the device, an extra blade insert (there will already be one installed in the device), the manual, a Quality Control card, and a USB cable.

Before using the device, check to see that it’s fully charged. To do so just click the control button once. The lights will light up. Their color shows what percent charge is remaining. If they turn green the device has 100%-20% charge remaining. Blue means 20%-5%. Red means 5%-0%. Anything other than green, we recommend charging. To do so, just connect the device to a power source via the USB cable. Charging takes approximately 3 hours.

HOW TO USE

Once your device is charged, you can begin using it! Here’s how;

1. Unlock by clicking control button 5 times
2. Insert HeatStick
3. Press and hold control button
4. Device will vibrate and light turns on
   • This device doesn’t seem to having a time set aside for heating
   • Cycle, including heating time is 3 minutes
5. At end of cycle the device will vibrate, light turns red, then turns off
6. Remove HeatStick

Our test users got 33 continuous uses with Greensound TOBA. That’s great!

Make sure to clean the device regularly. As we said above, cleaning TOBA is easy since you can remove the heating blade from the heating chamber. To do so just unscrew the cap and clean around the blade. You can even unscrew the blade insert if that makes it easier for you.

Unfortunately, the TOBA kit doesn’t come with any cleaning tools, such as a brush or swabs. Don’t worry though, as you can get some good quality, but inexpensive, cleaning accessories on AliExpress. Click here to see our favorites.

If you start to find that your blade doesn’t clean well anymore or if the blade breaks, you can swap it out for the extra blade insert included in your kit.

HEATSTICKS OVERVIEW

The Greensound brand does not produce their own HeatSticks. Instead, their devices are designed to work with other branded HeatSticks, such as HEETS and Marlboro for IQOS HeatSticks.

MANUAL

Greensound TOBA Manual PDF Download

SPECS

MANUFACTURER OVERVIEW

PURCHASE INFORMATION & CUSTOMER SUPPORT

Don’t forget to comment and rate this device below!