Pluscig P7

HIGHLIGHTS

WOULD WE RECOMMEND?

Pluscig P7 is a good device if you are looking for something sturdy but powerful. It gives you 30 consecutive uses and has a whole host of features.This device is a bit more advanced, but is simple enough to work. It’d be good for any frequent and/or advanced HnB users.

Our only complaint is that $70USD is a bit high for this device, but it does offer alot of features for the money…

FEATURES: Screen, locking mechanism, temperature adjustment, length of use adjustment, usage record, automatic-cleaning, cleaning prompt.

QUALITY: Seems very durable.

DESIGN: An upgrade on the Pluscig P3’s design. It’s not flashy but still nice. A bit heavy.

BUY NOW

[embedyt] https://www.youtube.com/watch?v=Y09KI9-Q1R4[/embedyt]

UNBOXING

In your Pluscig P7 kit you will find; the device, the manual, a Quality Control card, a USB cable, a cleaning brush, cleaning sticks, and gaskets (small paper circles).

Before using your device, check its charge level. To do so, click the control button 3 times to unlock, then check the battery icon on screen. If the battery is not fully charged, we recommend charging it before using. Just connect the device to a power source via the USB cable. Full charging for P7 takes a long time. Our device took approximately 4 hours and 40 minutes!

HOW TO USE

Now that your Pluscig P7 device is charged, you can begin using it. Here’s how;

1. Unlock:
   • click the control button 3 times
2. Set temperature:
   • click + or – buttons to change
   • you can choose anywhere between 250C°/482F° and 330C°/626F°
   • wait a moment and temp will automatically set
3. Set length of cycle:
   • click + and – buttons at the same time
   • choose length of cycle symbol (looks like a star with 3 points)
   • click + or – buttons to choose desired length
   • you can choose anything between 180 seconds (3 minutes) and 270 seconds (4.5 minutes)
   • click control button once to set
4. Insert the HeatStick
5. Turn on:
   • press and hold control button
6. Once heating starts the device will vibrate and the temperature numbers on screen will change
   • Heating time depends on set temperature
7. When heating is over the device will vibrate
8. Now you can use it
9. When the cycle ends the device will vibrate again
10. Remove the HeatStick

With this device there are a few other features that you need to know how to operate.

1. To clear usage record:
   • click + and – buttons at the same time
   • choose length of cycle symbol (two arrows that make a square)
   • click control button once to select
2. Self-cleaning:
   • click + and – buttons at the same time
   • choose self-clean symbol (looks like a little brush)
   • click control button once to select

Don’t forget that the P7 device will automatically prompt you to clean every 5 HeatSticks. All you have to do is select ‘YES’ or ‘NO’ on the screen. This is super convenient! But don’t forget to manually clean as needed.

To manually clean, wait until cool, remove the heating chamber insert, then use the brush and/or the cleaning sticks to wipe away any grime. One design feature we really like about this device is that when you remove the heating chamber insert the whole side of the heating chamber comes out. This makes it so easy to clean inside the heating chamber! We wish more devices were designed like this!

HEATSTICKS OVERVIEW

The Pludcig brand does not produce their own HeatSticks. Instead, their devices are designed to work with other branded HeatSticks, such as HEETS and Marlboro for IQOS HeatSticks.

MANUAL

Pluscig P7 Manual PDF Download

SPECS

MANUFACTURER OVERVIEW

PURCHASE INFORMATION & CUSTOMER SUPPORT

Don’t forget to comment and rate this device below!