This Product Makes Cleaning Your HNB Device So Much Easier
What are gaskets and why do you need them? Gaskets are small, inexpensive inserts for your IQOS holder that keep it clean by absorbing smoke oil and capturing tobacco residue, thus extending the life of your device.
Gaskets are easy to use. All you have to do is insert one into your holder so that it fits around the blade, then replace it once it starts looking dirty. That’s all there is to it! Super simple and definitely worth it. When you’re spending around $100USD on an IQOS device you want it to last a long time. Why not give it a better chance by using a gasket?
IQOS 2.4 & 2.4 Plus Gaskets IQOS 3.0 & IQOS 3 DUO Gaskets IQOS 3.0 Multi Gaskets
You can also use gaskets in non-IQOS devices, just be aware of what type of blade your gasket must fit. IQOS devices have long, flat blades so your gasket must have a long slit to fit around the blade. If your device has a different style of blade, for example a pin-style blade, you’ll need a gasket with a circle in the middle. This would be devices like HiTaste, Pluscig, iBuddy, etc.
Devices With Pin-Style Blades (ex. HiTaste, Pluscig, etc.)
HOW TO USE
STEP 1: Wait until your holder is cool
STEP 2: Get 1 gasket out
STEP 3: Gently place blade through gasket and lower gasket into holder heating chamber
STEP 4: Leave gasket in holder until gasket begins to look discolored, dirty, soggy, etc.
STEP 5: Remove gasket by turning holder upside down and gently tapping it against a hard surface until gasket comes out of heating chamber
STEP 6: Dispose of used gasket and replace with a new one
TIP: Use tweezers to help with steps 3 and 5 if you have difficulty maneuvering the gasket
- Gaskets come in many different sizes – make sure you have the right gasket for your device before purchasing
- Most gaskets available for purchase online work with flat blades only, not with pin-style blades – pin-style blade gaskets look similar, but they have a circle in the middle (donut shape) to accommodate the different blade shape
- Gaskets fit all IQOS devices and some devices from smaller manufacturers such as Lambda CC, TOBA, Aokey C&O, etc.
- All other tools needed to use gaskets can be found in your home (long needles, point type tweezers, even toothpick will work)
What do you think? Have you used gaskets before? Let us know in the comments below.