Aubark T002

HIGHLIGHTS

WOULD WE RECOMMEND?

Heat180

We were surprised just how powerful Aubark T002 is! When we first started testing this device we never imagined that it would give 44 consecutive uses! How impressive! Aubark T002 is a high-quality, less expensive alternative to Lil Solid Plus. That means that it works with Fiit HeatSticks, HEETS, and Marlboro for IQOS. It provides a good hit. $56USD is a little bit pricey, but compared to Lil Solid Plus – which is over $100USD and quite difficult to procure – Aubark’s price is acceptable!

FEATURES: Automatic-cleaning.

QUALITY: Very well made.

DESIGN: The structure is similar to Lil Solid Plus, but the physical appearance is different. We love the faux leather as it adds a touch of sophistication. It pairs well with the gold color. If we were to compare Lil Solid Plus and Aubark in terms of appearance we would say that Lil Solid Plus is chic and modern looking, whereas Aubark is sophisticated and traditional.

UNBOXING

Heat180

In your Aubark T002 kit you will find; the device, the manual, a USB cable, a cleaning brush, and cleaning sticks.

Once you’ve taken your Aubark device out of the kit, check the charge by clicking on the control button once. The light will turn on. The color of the light shows what percent charge is remaining. Dark blue means 100-60%, light blue means 60-30%, orange is 30-0%, red means 0%. If your device is anything other than dark blue, we recommend charging by connecting the device to a power source via the USB cable. Charging takes approximately 2 hours, 15 minutes.

HOW TO USE

Once your Aubark device is fully charged, you can begin using it. Here’s how;

Heat180

1. Insert the HeatStick
2. Press and hold control button to turn on
3. Device will vibrate and light will begin flashing light blue to show heating has started
   • heating takes approximately 10 seconds
4. Device will vibrate and light will turn solid when heating is done and device is ready to use
   • cycle lasts 4 minutes
5. Device will give warning vibration and light will start flashing before turning off
6. Light will turn off when cycle ends
7. Remove HeatStick

Aubark T002 offers automatic cleaning. To turn on the cleaning function click the control button 5 times. The  light will begin flashing red. Automatic-cleaning will last for 1 minute, 30 seconds. The device will vibrate twice when cleaning is finished and the light will turn off.

You will also need to manually clean your Aubark device. To manually clean, wait until cool, take the cap off, take the HeatSticks heating chamber insert out, put the cleaning brush in, and sweep all through the heating chamber to get rid of any dirt or built-up grime.

HEATSTICKS OVERVIEW

The Aubark brand does not produce their own HeatSticks. Instead, their devices are designed to work with other branded HeatSticks, such as HEETS and Marlboro for IQOS HeatSticks.

MANUAL

Aubark T002 Manual PDF Download

SPECS

MANUFACTURER OVERVIEW

PURCHASE INFORMATION & CUSTOMER SUPPORT