Aokey C&O

HIGHLIGHTS

WOULD WE RECOMMEND?

Aokey C&O is so cool as it allows you to use both GLO and IQOS HeatSticks. One side of the device is a holder for IQOS HeatSticks and the other side is an induction heating chamber for GLO HeatSticks. What a great idea! We were so impressed that we decided to award it with our Industry First Award! Amazing!

The battery is not the strongest on the market, but that might be because this is a first generation device. But for $40USD it is a absolute BARGAIN and definitely worth a try.

FEATURES: Can use both HEETS (IQOS) and NeoSticks (GLO), screen, temperature adjustment (GLO side only)

QUALITY: Great! Not the most powerful, but it’s sturdy.

DESIGN: Excellent! Aokey has done a great job by creating a device that combines IQOS and GLO. As far as we know this is the only device on the market that does so!

BUY NOW

[embedyt] https://www.youtube.com/watch?v=Ew2ttYjH6SI[/embedyt]

UNBOXING

In your Aokey C&O kit you will find; the device, the holder, the manual, a Quality Control card, a USB cable, a cleaning brush, and pipe cleaners.

HOW TO USE

Now that your device is charged, it’s ready to be used! Since Aokey C&O has two sides which operate differently we are going to look at the IQOS side first, then look at the GLO side.

Here’s how to use it;

IQOS

The IQOS side is a holder that detaches from the main body of the device.

Here’s how to turn the holder on;

• Take holder out of main device
• Insert HeatStick (HEETS or Marlboro for IQOS)
• Press and hold holder control button
• Holder will vibrate and LED light flashes
  • Heating takes 20 seconds
• Once heated, holder will vibrate and light turns solid
  • Cycle lasts 3 minutes, 33 seconds
• When cycle is over, holder will vibrate and light turns off
• Remove HeatStick

With this side you get 4 consecutive uses before needing to charge. You probably wont need that many consecutive uses, so just use when you need then put the holder back in the device and it’ll charge automatically.

It takes 10 minutes, 30 seconds to charge the holder, whether you only used it once or used it several times consecutively. When it’s charging a battery icon will show on the display screen. When charging is done the screen will turn off.

You cannot use the GLO side while the IQOS side is charging.

To clean the IQOS side, remove the holder cap and gently clean around the blade with the cleaning sticks.

GLO

The GLO side is attached to the main body of the device and includes a display screen.

Here’s how to use it;

• Change temperature by pressing and holding control button
  • L = low
  • H = high
• Insert HeatStick (Neo, Kent NeoStiks, Dunhill NeoStiks)
• Click control button 5 times
• Device will vibrate and screen turns on
  • Heating takes 40 seconds
• When ready to use, device will vibrate and screen shows ‘OKAY’
  • Cycle lasts 5 minutes, 50 seconds
• When cycle done, device will vibrate and screen turns off
• Remove HeatStick

To check battery status, check the battery icon on screen. If it needs charging, connect it to a power source via the USB cable. Charging takes approximately 1 hour, 10 minutes.

To clean the GLO side, open both ends of the heating chamber, insert cleaning brush or pipe cleaners and wipe away grime.

HEATSTICKS OVERVIEW

The Aokey brand does not produce their own HeatSticks. Instead, their devices are designed to work with other branded HeatSticks, such as HEETS, Marlboro for IQOS, and NeoStiks.

MANUAL

Aokey C&O Manual PDF Download

SPECS

MANUFACTURER OVERVIEW

PURCHASE INFORMATION & CUSTOMER SUPPORT

Don’t forget to comment and rate this device below!